Low

BEHA-AMPROBE  AMP-330-EUR  DIGITAL CLAMP METER, 3-5/6 DIGIT, AUTO

BEHA-AMPROBE AMP-330-EUR
BEHA-AMPROBE AMP-330-EUR
BEHA-AMPROBE AMP-330-EUR
Technical Data Sheet (2.30MB) EN Bekijk alle technische documenten

De afbeelding is alleen ter illustratie. Zie de productbeschrijving.

BEHA-AMPROBE AMP-330-EUR
BEHA-AMPROBE AMP-330-EUR
BEHA-AMPROBE AMP-330-EUR

Productoverzicht

The AMP-330-EUR is an industrial motor maintenance AC/DC 1000A Clamp Meter offers a complete range of measuring functions for modern industrial environments and motor testing. It features True-RMS sensing, low pass filters and fast response processors for quick, error-free measurements. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp and a third input jack enables motor rotation and 3-phase sequence testing. The inrush current measurements for motor start-up monitoring, allow users to verify that the motor is receiving the required inrush current to support proper motor start. The DC micro amps output for measurement of flame sensors. Test the proper operation of the flame sensor safety system in gas appliances. A broken sensor in a gas appliance will prevent the safety valve from opening and the appliance will not work. It functions to verify quality of electrical connections and to check if motor and transformer coils are working properly.
  • Low pass filter for variable frequency drives
  • DC micro amps for flame sensor testing
  • Capacitance measurement for start and run motor capacitors
  • CAT IV 600V, CAT III 1000V safety rating
  • True-RMS
  • Amp-Tip function
  • Non-contact voltage detection (NCV)
  • Audible continuity and diode test
  • Data hold, relative zero, max/min/avg mode
  • Large LCD backlit display

Productgegevens

DMM Functions:
AC/DC Current, AC/DC Voltage, Capacitance, Continuity, Diode, Frequency, Resistance, Temperature
Current Measure AC Max:
1kA
Voltage Measure AC Max:
1kV
Voltage Measure DC Max:
1kV
Resistance Measure Max:
60kohm
DMM Response Type:
True RMS
Range Selection:
Auto
No. of Digits:
3.8
Jaw Opening Max:
51mm
Product Range:
-
SVHC:
No SVHC (15-Jun-2015)

Zoeken naar vergelijkbare producten  per overeenkomende kenmerken

Toepassingen

  • Test & Measurement;
  • Industrial;
  • Motor Drive & Control

Wetgeving en milieu

Land van oorsprong:
Taiwan

Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd

Tariefnummer:
90303100
Gewicht (kg):
1

Gekoppelde producten

Vergelijkbare producten