Low

VMUSIC3 - 

USB Interface, VNC2-48L1B, USB, 5.5 V

FTDI VMUSIC3

De afbeelding is alleen ter illustratie. Zie de productbeschrijving.

Fabrikant:
FTDI FTDI
Artikelnr. fabrikant:
VMUSIC3
Ordercode:
2419939
Technische datasheet:
(EN)
Bekijk alle technische documenten

Productgegevens

:
5.5V
:
-
:
USB
:
-
:
-
:
-
:
VNC2-48L1B
Zoeken naar vergelijkbare producten Kies en wijzig de bovenstaande eigenschappen om soortgelijke producten te zoeken.

Productoverzicht

The VMUSIC3 is an USB host and MP3/WMA player Vinculum-II Development Module. The default firmware of the VMUSIC3 supports audio playback and UART or SPI communication interfaces for integration into the target product. VMUSIC3 can be used to read MP3 and other audio format files from a USB flash disk, process the data and output the stereo audio through the line-out header and headphone jack. The VMUSIC3 is a drop in replacement for the VMusic2 for the majority of VMusic2 applications. VMUSIC3 uses firmware called V2MSC which is similar to V2DAP (used in VDrive3) with an additional module for controlling MP3 playback. However for a small number of applications that use SPI, differences exists between VMusic firmware and V2MSC firmware which would require some changes to be made to the application software.
  • MP3 and WMA playback
  • USB A type socket to connect to USB client devices
  • 2mm (0.08") pitch 8-pin header used for the UART/SPI interface
  • Connects directly and communicates with a FTDI TTL-232R-3V3-2mm USB-UART cable
  • Jumper selectable UART and SPI interfaces, both operating 3.3V TTL/CMOS
  • Pre-programmed with V2MSC firmware
  • Vinculum-II debugger module port under the enclosure, for changing the firmware and debugging
  • UART programming mode control pins PROG# and RESET# are connected to an internal header
  • Reprogrammable over USB port from flash drive

Toepassingen

Computers & Computer Peripherals

Gekoppelde producten

Geselecteerde vergelijken