Low

TE CONNECTIVITY / RAYCHEM  URHR-2-0  Heat Shrink Boot, shrinkHOop™ Grommet, Straight, 1.22 ", 31 mm, Black

TE CONNECTIVITY / RAYCHEM URHR-2-0
Technical Data Sheet (766.69KB) EN Bekijk alle technische documenten

De afbeelding is alleen ter illustratie. Zie de productbeschrijving.

Productoverzicht

The URHR-2-0 is a cable clamp Heat-shrink Grommet can be placed over the cable assembly after the connector pinning operation is completed. The ultra-high expansion ratio material conveniently fills the space between the clamp type connector accessory and the cable. When clamped into position, URHR grommet provides strain relief that is more consistent and convenient than many conventional practices-for example, taping, grommet or tape/grommet combination. The high ratio conformity of URHR grommet will match most typical cable configurations from single conductor to the high density multiple conductor arrangements. With URHR grommet, repair or rework is a snap-simply heat the grommet until soft and slide a non-metallic probe through the centre of the wire bundle enlarging the grommet I.D. Once cooled, the grommet will remain open allowing wires to be added, removed or reworked. The system can then be checked, the grommet reheated, positioned and clamped in place.
  • Softer material for better strain relief
  • Up to 20:1 ultra-high shrink
  • Less assembly time
  • Rework made easier
  • No build-up taping or feeding wire through a small grommet opening
  • Typical installation in just 10 to 20 seconds
  • Re-expandable I.D. allows wire addition to a cable bundle
  • 0.5% Water absorption (maximum)
  • 1.4 Specific gravity (maximum)
  • 250% Ultimate elongation (minimum)
  • 1200psi (8.3Mpa) Tensile strength (minimum)

Productgegevens

Boot Configuration:
Straight
I.D. Supplied - Imperial:
1.22"
I.D. Supplied - Metric:
31mm
Shrink Tubing / Boot Colour:
Black
Total Length - Imperial:
Total Length - Metric:
I.D. Recovered Max - Imperial:
0.102"
I.D. Recovered Max - Metric:
2.6mm
Shrink Tubing / Boot Material:
PO (Polyolefin)
Shrink Ratio:
11.9:1
Product Range:
-
Shrink Type:
Heat
Material:
Polyolefin
Length - Imperial:
0.512 "
Accessory Type:
Cable Clamp Heat Shrink Grommet
Colour:
Black
SVHC:
To Be Advised

Zoeken naar vergelijkbare producten  per overeenkomende kenmerken

Toepassingen

  • Industrial

Wetgeving en milieu

Land van oorsprong:
United States

Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd

RoHS-compliantie:
Ja
Tariefnummer:
85469090
Gewicht (kg):
.001361

Gekoppelde producten

Vergelijkbare producten

Zoek producten die qua functionaliteit lijken op dit product. Selecteer een van de volgende koppelingen, waarna u naar een productgroeppagina gaat met alle producten in deze categorie die het vermelde kenmerk delen.