SEN0647

The DFRobot SEN0647 F2 is a high-performance, mid-range laser distance sensor based on dTOF (Direct Time-of-Flight) technology, offering precise measurements up to 25m (±30mm) at a rapid 100Hz refresh rate. Compatible with Raspberry Pi, Arduino, and ESP32 via UART/I2C interfaces, it seamlessly integrates into industrial automation, drones, AGVs and smart traffic systems. Engineered for durability, its 100K LUX ambient light resistance ensures reliable operation in outdoor and high-interference environments, while multi-interface support (UART/I2C/GPIO) enables flexible integration with microcontrollers, PLCs and sensor fusion setups.

• Refresh Rate: 100Hz
• Ranging Distance: 0.05-25m
• Ranging Accuracy: ±30mm
• Wavelength: 905nm
• Ambient Light Resistance: Up to 100,000 lux
• Field of View (FOV): 1–2°
• Power Supply: 4.3-5.2V DC
• Power Consumption: 250mW (typical)
• Interface: UART / I2C / GPIO
• I2C Default Address: 0x80
• Dimensions (HxWxD): 22.7x28x13.6

Opmerkingen

Note: The cable colors included with this product correspond to the power supply as follows: Red - GND, Black - VCC. Please check power connections carefully when installing.