787T-500-IS

787T-500-IS is an intrinsically safe dual output low frequency sensor. This dual-output sensor measures both vibration and temperature, providing more data from one sensor to simplify your condition monitoring setup. This dual-output sensor is useful in applications where users want to know the temperature at the mounting locations. Temperature is measured by an integrated circuit chip that produces a DC output voltage signal. The signal changes by 10 millivolts per degree Celsius. A one degree Celsius change infers a 10mV voltage difference where the reference temperature 0°Celsius. It is certified for use in Class I Division 1 and Zone 0 / Zone 1 hazardous areas.

• Senses both acceleration and temperature, clear signals at low vibration levels
• Ideal for slow-speed machinery, rugged design, hermetic seal, ESD protection
• 500mV/g sensitivity at (±5%, 25°C), 10g peak acceleration range at (VDC <gt/> 25V)
• 1% amplitude nonlinearity, ±3dB frequency response from 0.2 to 10,000Hz
• 22KHz resonance frequency, 300 ohm max output impedance
• Voltage source range from 18 to 30VDC, current regulating diode range from 2 to 10mA
• 12VDC nominal bias output voltage, hermetic sealing
• 1/4-28 captive screw w/ 0.046” diameter safety wire hole mounting
• 316L stainless steel case material, 3-pin, MIL-C-5015 style output connector
• Operating temperature range from -50°C to +120°C

Inhoud

Intrinsically safe dual output low frequency sensor, 1/4-28 captive screw, Calibration data (level 2).