U hebt in de velden die hieronder gemarkeerd worden weergegeven een waarde ingevoerd die ongeldige tekens bevat. Pas uw selectie aan met behulp van alleen geldige tekens.
Het product komt mogelijk niet exact overeen met uw zoekopdracht
U heeft dit product eerder gekocht.
Bekijk de bestelgeschiedenis
NGM-COM2A
Bench Power Supply, Programmable, 2 Output, 0 V, 20 V, 6 A
De afbeelding is alleen ter illustratie. Zie de productbeschrijving.
- Fabrikant:
- ROHDE & SCHWARZ ROHDE & SCHWARZ
- Artikelnr. fabrikant:
- NGM-COM2A
- Ordercode:
- 3281030
- Productreeks
- NGM200 Series
- Technische datasheet:
- NGM-COM2A Data papier
Productreekskiezer (NGM200 Series)
Bekijk alles uit dit productassortimentAlternatieven voor NGM-COM2A
Productgegevens
Wilt u soortgelijke producten bekijken? Selecteer hieronder uw gewenste attributen en druk op de knop ×
- :
- Programmable
- :
- 2 Output
- :
- 0V
- :
- 20V
- :
- 6A
- :
- 120W
- :
- 230VAC
- :
- 3 Years
- :
- NGM200 Series
Technische documenten (16)
- Technical Data Sheet EN
- Application Note 3 EN
- Application Note 2 EN
- Technical Notes & Articles EN
- Programming Manual EN
- Quick Start Guide EN
- Promotional Offers EN
- Reference Manuals EN
- Assembly Instructions EN
- User Manual EN
- Application Note EN
- Manufacturer Catalogue EN
- Miscellaneous EN
- Enhanced Product Overview EN
- Operating Instructions EN
- Application Note 4 EN
CAD downloads
--Selecteer...
✔
--Selecteer...
×
Voorwaarden en bepalingen
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Productoverzicht
NGM-COM2A is a bundle consists of NGM202 delivers up to 60W of output power per channel with pre-installed options such as NGM-K102 wireless LAN remote control, NGM-K103 digital trigger I/O, NGM-K104 digital voltmeter functionality, NGM-K106 battery simulation function. The output channels are floating, galvanically isolated and protected against overload and short circuits. Two-quadrant architecture allows the NGM200 Series power supplies to function both as a source and a sink to simulate batteries and loads. Short recovery times enable them to handle fast load changes that occur, for example, when mobile communications devices switch from sleep mode to transmit mode. High-speed data acquisition and convenient battery simulation widen the range of applications.
- Fast load regulation, high speed acquisition and digital voltmeter functionality
- Minimum residual ripple and low noise
- High resolution touchscreen for easy operation
- Readings with up to 6½ digit resolution
- Protections functions to safeguard instrument and DUT
- Galvanically isolated, floating channels
- Output stage isolated with relays
- Two quadrants: operates as source and sink
- Constant voltage, constant current and constant resistance modes
- Variable output impedance, battery modelling, battery simulation
Inhoud
NGM202 power supply, NGM-K102 Wireless LAN remote control, NGM-K103 digital trigger I/O, NGM-K104 digital voltmeter functionality, NGM-K106 battery simulation function.
Niet langer geproduceerd
6.515,00 €
Er zijn geen prijzen beschikbaar. Neem contact op met de klantenservice.
- Prijs voor:
- 1 KIT à
Meerdere: 1 Minimum: 1
| Hoeveelheid | Prijs | Uw prijs |
|---|---|---|
| 1+ | 6.515,00 € | |
Er zijn geen prijzen beschikbaar. Neem contact op met de klantenservice.
Totaalprijs:
Totaalprijs: ( )
Totaalprijs: --
Filtertool