Productgegevens
Productoverzicht
The CDCE913PWG4 is a Programmable Clock Synthesizer generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL. The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal. The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance. The device supports non-volatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the SDA/SCL bus, a 2-wire serial interface.
- In-system programmability and EEPROM
- Serial programmable volatile register
- Non-volatile EEPROM to store customer settings
- Free selectable output frequency up to 230MHz
- Low-noise PLL core
- PLL loop filter components integrated
- Flexible clock driver
- Programmable SSC modulation
- 50ps Typical low period jitter
- Green product and no Sb/Br
Toepassingen
Clock & Timing, Consumer Electronics, Computers & Computer Peripherals
Waarschuwingen
Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Technische specificaties
Clock Synthesiser
3Outputs
1.9V
14Pins
85°C
-
No SVHC (17-Dec-2015)
230MHz
1.7V
TSSOP
-40°C
-
MSL 1 - Unlimited
Wetgeving en milieu
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerdLand van oorsprong:Taiwan
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd
RoHS
Conformiteitsverklaring