MCP1630DM-LED2

The MCP1630DM-LED2 is a MCP1630 boost mode LED driver demo board, which is a step up, switch mode, dc to dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with a jumper selection. Other output currents can be obtained with minor modifications to the board. The MCP1630 boost mode LED driver demo board utilises MCP1630V high speed pulse width modulator. The 8 pin MCP1630V device contains the analog components necessary for an analog switch mode control loop including an error amplifier, PWM comparator, and a high current driver pin. The switching frequency and maximum duty cycle for the MCP1630V are determined by an external clock source. An 8 pin PIC12F683 microcontroller is used to provide a 500KHz switching clock for the MCP1630. In addition, the PIC12F683 firmware supervises the circuit output voltage and can optionally dim the LEDs when a potentiometer is attached.

• Compact size with high output power
• High efficiency over entire operating input voltage range
• Selectable output current 350mA or 700mA
• 30W maximum output power
• Optional software dimming control
• Factory programmed source code provided
• Switching frequency, maximum duty cycle, and MCP1630 reference voltage can be modified in firmware
• Additional application functions can be provided in firmware

Toepassingen

Power Management, Embedded Design & Development, LED Lighting

Inhoud

MCP1630 Boost Mode LED Driver Demo Board, A PCB containing a string of LEDs, Analog and Interface Products Demonstration Boards CD ROM

Opmerkingen

90 Day Warranty only. After Expiration of Warranty returns must be processed via Microchip.