ADHESIVE HS300, 500ML

Spray Adhesive HS 300 is a high-strength adhesive, formulated without Methylene chloride or other chlorinated solvents. Spray adhesive HS 300 has a longer open bond time allowing large areas to be covered before film dries. Economical, good coverage. Free from chlorinated solvents. Spray adhesive HS 300 will provide high-strength bonds in many different areas chipboard and concrete, insulation materials, canvas and leather, paper, wood and cork, metal, plastic and rubber.

• 500ml fill size
• Clear, amber liquid appearance
• Acetone odour
• 0.68 SG at 25°C and 3bar pressure at 25°C
• 1.7g/sec discharge rate
• Styrene isoprene copolymer polymer type
• Approximately 1-5 minutes tack time
• Maximum adhesion in 12 - 24 hours bonding time
• Temperature range up to 50°C (dried film)
• Soluble in some solvents, insoluble in water

Remarques

Stored at normal ambient temperatures and has a shelf life of not less than 3 years with correct storage. Aerosols should always be stored below 50°C, away from direct heat and flame.