N2804A

N2804A is a 300MHz high voltage differential probe provides superior general-purpose differential signal measurements that are required for high-speed power measurement such as measuring characteristics of switching power devices, DC-DC converters or class D amplifiers, vehicle bus measurements, and high-speed digital system designs. It is differential probe offers 100:1 attenuation ratio, allowing it to be used adequately for high voltage signal measurements. This 300MHz differential probe offers 100:1 attenuation ratio, allowing it to be used adequately for high voltage signal measurements. The differential probe has a differential input resistance of 4Mohm and low input capacitance of 4 pF to minimize circuit loading. The probe comes with a pair of extension leads (30 cm long) with a damping resistor built in to damp out the in-band resonance and provide flat frequency response even while using the extension leads and probe tip accessories.

• Powered by the oscilloscope’s AutoProbe interface
• Rise time (calculated, 0.35/Tr, 10 to 90%) is 1.167ns
• CMRR (typical) is -80dB at 60Hz, -50dB at 10MHz
• Approved by IEC61010-031
• Dimension is 111mm x 22mm x 14mm
• 1.2m BNC cable
• CMRR (typical) is -80dB at 60Hz, –50dB at 10MHz

Contenu

300MHz high voltage differential probe, 2 each alligator clips, 2 each pincer clips , 2 each extension leads (30 cm), 1 trimmer tool (for offset adjustment), 8 color-coded rings.

Remarques

In addition, we have calibration services for this product (Europe only). Visit our calibration service page to see details of what options are available.