Hoeveelheid | |
---|---|
92+ | 7,080 € |
Productgegevens
Productoverzicht
The MAX744AEWE+ is a 5V, step down, current mode PWM DC to DC converter in 16 pin WSOIC package. The MAX744A accept inputs from 6V to 16V and deliver 750mA. The MAX744A has 500mA load capability for inputs above 6V and has tighter oscillator frequency limits for low-noise (radio) applications. Typical efficiencies are 85% to 96%. Quiescent supply current is 1.7mA and only 6μA in shutdown. Pulse width modulation (PWM) current mode control provides precise output regulation and excellent transient responses. Output voltage accuracy is ±5% over line, load and temperature variations. Fixed frequency switching allows easy filtering of output ripple and noise using small external components.
- Single preselected inductor value, no component design required
- Cycle by cycle current limiting
- High frequency current mode PWM architecture
- Overcurrent limiting, undervoltage lockout and programmable soft-start protection
- Oscillator frequency limits from 159KHz to 212.5KHz
Toepassingen
Power Management, Portable Devices, Consumer Electronics
Opmerkingen
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technische specificaties
Fixed
Buck (Step Down)
16V
500mA
16Pins
5V
-
185kHz
-40°C
-
MSL 1 - Unlimited
WSOIC
185kHz
1Outputs
6V
500mA
WSOIC
Surface Mount
5V
-
90%
85°C
-
No SVHC (21-Jan-2025)
-
Technische documenten (1)
Aanverwante producten
1 product gevonden
Wetgeving en milieu
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerdLand van oorsprong:Philippines
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd
RoHS
RoHS
Conformiteitsverklaring