TWR-K60D100M-KIT

The TWR-K60D100M-KIT is a tower system kit for Kinetis MK60DN512VMD10 microcontroller. It can function as a standalone, low cost platform for the evaluation of the Kinetis K10, K20 and K60 family of microcontroller (MCU) devices. The MK60DN512VMD10 is a ARM Cortex‐M4 architecture with USB 2.0 full speed OTG controller and 10/100Mbps Ethernet MAC. The TWR-K60D100M operates as a standalone debug tool and can also be combined and used as part of the modular tower system development platform. An onboard MC9S08JM60 based open source JTAG (OSJTAG) circuit provides a JTAG debug interface to the K60D100M. A standard USB A male to mini B male cable can be used for debugging via the USB connector. The module features a socket that can accept a variety of different tower plug in modules featuring sensors, RF transceivers and more.

• Integrated open source JTAG via USB
• SD card slot
• MMA8451Q three axis accelerometer
• General purpose tower plug in (TWRPI) socket
• Touch TWRPI socket adds support for various capacitive touch boards
• Tower connectivity for access to USB, Ethernet, RS232/RS485, CAN, SPI, I2C, Flexbus
• Four capacitive touch pads
• Potentiometer, four LEDs, two push buttons and infrared port
• Isolation for low power measurements
• 3.3V or 1.8V operation

Contenu

TWR-K60D100M board, TWR‐ELEV elevator module, TWR‐SER serial module, USB cable, CR 2025 coin cell battery, Quick start guide.